Quickly ready for use, the system can be connected up directly to calibration tools, such as INCA. This means IAV Meru is not only suitable for use on the test bench but can also be taken on test drives without a problem.
IAV Meru records as many as eight cylinder-pressure signals on a cycle-accurate basis and processes them in real time under thermodynamic aspects. Unlike other comparable indication systems, IAV Meru impresses with real-time signal-evaluation capability – e.g. for closed-loop control of PMI and main center of heat release.
Users can work with the ready-made thermodynamic block sets supplied with the system or add their own MATLAB / Simulink algorithms for processing signals. The data computed can be exported in different formats for further analysis by the user.
Besides the standard configuration, we can also provide the IAV Meru with additional inputs and outputs in line with client needs. The unit includes our Meru Commander software for configuring the system as well as for recording and evaluating data.
|Inputs:||8 x analog, differential, +/-10V, joint galvanic isolation (standard, variations on request), 400 kHz sampling frequency, 16 bit|
|Data acquisition:||Angle and time-based acquisition, real-time processing|
|Resolution:||16-bit resolution in 0.1 °CA steps|
|Evaluation:||Simulink blocks for standard variables (COHR, IMEP etc.) included; for special applications: evaluation with user algorithms developed in MATLAB/Simulink with automatic code generation|
|Signal processing:||FPGA, 400 MHz floating-point DSP, digital filters up to the order of 1200|
|Interfaces:||2 x CAN, USB 2.0, 10 Mbit/s SSI, RS232|
|Additional inputs:||4 x analog, differential, +/-20 V, joint galvanic isolation, 16 bit, 1 kHz|
|Outputs:||4 relay outputs|
|Angle signals:||Inputs for angle encoder and 60-2 wheel|
|Power supply:||7-40 VDC, 12 W or 230 VAC|
|Dimensions:||30cm x 18cm x 13cm, or 19-inch for installation in racks|