Automotive Testing Expo Europe

Product by IAV – Customized Solutions for You

      Customized Product Solutions

      New powertrains, more vehicle derivatives, complex algorithms on control units and ever-tighter emission regulations in conjunction with shorter development cycles in an increasingly digital world: automobile developers are under enormous pressure. This is why development tools are called for today that once again provide scope for creativity: Products from IAV.

      IAV is presenting its product solutions and testing equipment at the Automotive Testing Expo from June 05-07.

      As an engineering partner, we have been getting innovations into volume production for over 30 years. This has a lot to do with our 6,000 or so first-class developers, but also with the development tools we use in our everyday work. These products assist developers in their challenging daily routine involving all manner of activities in the field of measurement, testing, analysis, layout, simulation and calibration. Throughout the V process, IAV uses the best development tools that are available on the market. And if we cannot find them there, we develop them ourselves – from practitioners for practitioners.

      Over the last three decades, this approach has seen the creation of many products that have set new standards. Typical IAV: our products are intuitive to use and come with the built-in expertise of our top developers. This makes it easy for the user to cope with development challenges of any complexity.

      Regardless of whether a developer wants to optimize a component or design an entire powertrain, IAV products are at their side throughout projects of any magnitude. No matter how big a development project is: anyone using these IAV tools is just a mouse click away from the knowledge of three decades of automotive engineering development.

      Meet IAV at Automotive Testing Expo Europe 2018. We look forward to introducing you to our product solutions and testing equipment.

      Testing facilities

      back

      The Himalayas in Berlin

      As one of the world's leading engineering partners for the automotive industry, IAV has a large number of state-of-the-art testing facilities, including many engine test benches for the configuration of combustion engines and electric motors together with our roller test benches, as well as two crash test facilities in Gifhorn and Ingolstadt.

      One of our testing facility highlights is the altitude climate roll, which started operations in early 2017. This has brought the Himalayas to us in Berlin: the highly advanced test bench can simulate altitudes up to 5,300 meters and temperatures between -30°C and +40°C, for reproducible visualization of the very highest mountain passes in the world. Besides altitude trials, we also use the altitude climate role for RDE tests.

      To make all this possible, our project managers have entered into uncharted territory in many respects - in constructing the pressure cell, with the refrigeration concept and with the customized automation solution. And the "CarMaker" software takes our configuration engineers on virtual vehicle trials through the Himalayas or the Andes. Needless to say that we are particularly proud of this test bench - especially in view of the fact that there is only one other facility like it all over the world.

      But our testing facilities also set standards in other areas as well. For example when it comes to function and integration tests for infotainment systems: Our "Remote Infotainment TestLab" can be used to test systems and devices all over the world without actually having to be on site ourselves. Instead, the infotainment system is controlled via the internet, thus avoiding many expensive, time-consuming flights and business trips. And our radio lab in Gifhorn tests receivers and their software with recorded HF signals. This also saves our engineers from many vehicle trials.

      Thanks to our broad range of hardware and software tools in combination with our modern testing facilities, we always find the right system solutions to meet the needs of our customers. On request, our development tools can also be adapted to their individual requirements. After all, we know that customized solutions produce the best results.

      Highlights 2018

      From developers for developers: IAV products make work easier because they result from practical applications and are always state of the art. For instance, the IAV Xingu for smart, scalable dataset management and IAV Primero for simulating lambda probe errors.

      IAV Xingu lets calibrators compare their work with the calibration guidelines, detect correlations and recognize possible conflicts with current legislation with regard to OBD, for example.

      (...) More

      On-board diagnosis of the lambda probe has to recognize ageing effects early on before the probe is no longer able to supply the necessary signals for exhaust-relevant functions in the vehicle (such as mixture control or catalyst diagnosis). IAV Primero checks whether this really works as it should.

      (...) More
    • East Entrance

      Landesmesse Stuttgart GmbH
      Messepiazza 1
      70629 Stuttgart

      Site map: IAV at the Testing Expo

      Venue

      East Entrance 
      Landesmesse Stuttgart GmbH 
      Messepiazza 1 
      70629 Leinfelden-Echterdingen

      Opening hours

      Tuesday, 05 June,
      10 am - 5 pm
      Wednesday, 06 June,
      10 am - 5 pm
      Thursday, 7 June,
      10 am - 3 pm

      Click here for the show layout.

      You can find IAV in hall 10, stand 1740.

    • Many thanks for your interest.

      How can we help you?

      Your request/concern:
      Personal details
      Address
      Contact details

      You can find our data privacy policy here.

      All fields marked with a "*" are mandatory.